Zone Information Tab¶
This section provide details on the Zone Information tab
| Setting | Description | Unit | Default Value |
|---|---|---|---|
| Constructions | Description | ||
| Loads | Description | ||
| Conditioning | Description | ||
| Ventilation | Description | ||
| Domestic Hot Water | Description | ||
| Dayligth Mesh Resolution | Description | ||
| Dayligth Workplane Height | Sensor Node Height | 0.8 m | |
| Internal Mass Construction | Description | ||
| Internal Mass Exposed Floor Area | Description |
| Setting | Description | Unit | Default Value |
|---|---|---|---|
| People | |||
| Occupancy density | Description | ||
| Occupancy schedule | Description | ||
| Equipment | Description | ||
| Equipment power density | Description | ||
| Equipment availability schedule | Description | ||
| Lighting | Description | ||
| Lighting power density | Description | ||
| Lighting availability schedule | Description | ||
| Dimming type | Description | ||
| Illuminance target | Description |
| Setting | Description |
|---|---|
| Facade | |
| Ground | |
| Partition | |
| Roof | |
| Slab | |
| Facade is adiabatic | |
| Ground is adiabatic | |
| Partition is adiabatic | |
| Roof is adiabatic | |
| Slab is adiabatic |
| Setting | Description | Units | Default Value |
|---|---|---|---|
| Heating | |||
| Heating setpoint | |||
| Heating schedule | |||
| Heating limit type | |||
| Max heating capacity | |||
| Max heating capacity | |||
| Max heat flow | |||
| Heating CoP | |||
| Cooling setpoint | |||
| Cooling schedule | |||
| Cooling limit type | |||
| Max cooling capacity | |||
| Max cool flow | |||
| Cooling CoP | |||
| Mechanical ventilation | |||
| Mechanical ventilation schedule | |||
| Min fresh air per area | m3/s-m2 | 0.0003 | |
| Min fresh air per person | m3/s-person | 0.0025 | |
| Economizer type | NoEconomizer | ||
| Heat recovery type | None | ||
| Heat recovery efficiency (latent) | 0.65 | ||
| Heat recovery efficiency (sensible) | 0.70 |
| Setting | Description | Unit | Default Value |
|---|---|---|---|
| Infiltration | Description | ||
| Infiltration rate | Description | ||
| Natural ventilation | Description | ||
| Natural ventilation minimum outdoor air temperature | Description | ||
| Natural ventilation maximum outdoor air temperature | Description | ||
| Natural ventilation maximum relative humidity | Description | ||
| Natural ventilation schedule | Description | ||
| Natural ventilation zone temperature setpoint | Description | ||
| Scheduled ventilation | Description | ||
| Scheduled ventilation ACH | Description | ||
| Scheduled ventilation schedule | Description | ||
| Scheduled ventilation setpoint | Description | ||
| Buoyancy | Description | ||
| Wind | Description | ||
| Afn | Description |
| Setting | Description | Unit | Default Value |
|---|---|---|---|
| Enabled | Description | ||
| Scheduled | Description | ||
| Supply Temperature | Description | ||
| Inlet Temperature | Description | ||
| Flow rate | Description |
| Setting | Description | Unit | Default Value |
|---|---|---|---|
| Type | Description | ||
| Construction | Description | ||
| Operable area | Description | ||
| Shading is used | Description | ||
| Shading system availability schedule | Description | ||
| Shading system setpoint | Description | ||
| Shading system transmittance | Description | ||
| Shading system type | Description | ||
| Zone mixing | Description | ||
| Zone mixing availability schedule | Description | ||
| Zone mixing delta temperature | Description | ||
| Zone mixing flow rate | Description | ||
| Virtual partition | Description | ||
| Airflow network discharge coefficient | Description | ||
| Airflow network temperature setpoint | Description | ||
| Airflow network window availability | Description |