Zones¶
Setting | Description | Unit | Default Value |
---|---|---|---|
Constructions | Description | ||
Loads | Description | ||
Conditioning | Description | ||
Ventilation | Description | ||
Domestic Hot Water | Description | ||
Dayligth Mesh Resolution | Description | ||
Dayligth Workplane Height | Sensor Node Height | 0.8 m | |
Internal Mass Construction | Description | ||
Internal Mass Exposed Floor Area | Description |
Constructions¶
Assigns one of the Constructions objects to the selected zone.
Conditioning¶
Assigns one of the Conditioning created in the Conditioning Tab.
Ventilation¶
Assigns one of the Ventilation objects created in the Ventilation Tab.
Domestic Hot Water¶
Assigns one of the Domestic Hot Water objects created in the DHW Tab.
Dayligth Mesh Resolution¶
Defines the Dayligth Mesh Resolution. To use a finer mesh resolution when running any a daylighting simulation, adjust the “Geometric Density” option. Values are in meters. A fine mesh resolution will show a spacial distribution of daylighting better than a coarse one, but will take longer to calculate.
Dayligth Workplane Height¶
The distance of sampling nodes off of analysis surfaces. A value of 0.8 m will put the sensor nodes roughly at desk height.
Internal Mass Construction¶
Todo
Section to be written
Internal Mass Exposed Floor Area¶
Todo
Section to be written